Need water cooling loop input

kosmok1000 · Jun 9, 2012

I would like your comments please.
Should I make two separated loops since I have two pumps on the Koolance 450X2 reservoir, or one loop and go from the CPU to GPU'S?
the way I have now it is reservoir/pumps to two 480 rads to CPU from to another 480 rad to GPU'S and back to reservoir, but this way only uses on pump.
I their a way to use both pumps on one big loop? or is better to have two loops?
thank you for your input.
Sorry but english is not my main languish.

Carlitos714 · Jun 9, 2012

I have tried dual loops and there is really no need. Do one big loop!

theseekeroffun · Jun 9, 2012

I believe Koolance makes an insert that will allow you to run the pumps in serial. Then you would have one loop with dual pumps.

SwishaMane · Jun 9, 2012

BIG LOOP! MY question... Why is the bottom rads fittings on other end of case the top rad? If you turned it, the lines wouldnt have to be so long, and would help shorten things dramatically. Nothing wrong with two pumps in series, it wont increase flow rate, but will be redundant in case one pump fails.

kosmok1000 · Jun 10, 2012

because I going to use Koolance cuick disconnect so the MB tray can be removed easily, and is not enough space I tried.
thank you for your input

Need water cooling loop input

Top Contributors this Month

Recommended Communities