Yesterday I changed out my old Asus Graphics card and installed a new Asus RTX 2070 oc edition card and now have the motherboard codes red light on with the following codes being displayed.25-26-30-31-32 .Can someone tell me what these codes are and how changing the graphics card made this come on..They were not on before the card change..Any Help Appreciated...
Maximus IX APEX MB Codes Now On
NIK1
1 - 6 of 6 Posts
Joined
·
758 Posts
Yesterday I changed out my old Asus Graphics card and installed a new Asus RTX 2070 oc edition card and now have the motherboard codes red light on with the following codes being displayed.25-26-30-31-32 .Can someone tell me what these codes are and how changing the graphics card made this come on..They were not on before the card change..Any Help Appreciated...
Joined
·
14,851 Posts
Hi,
Most are memory related
30 is wake from s3 state
25-26 I don't know.
Your mother board manual probably won't show much more but is where to look.
Most are memory related
30 is wake from s3 state
25-26 I don't know.
Your mother board manual probably won't show much more but is where to look.
Joined
·
630 Posts
If all you did was changed the GPU and now can't even get into bios. If for example it's just cycling through those codes. The two easiest things to try are 1) try to seat the GPU in the slot again and 2) If that doesn't help try pressing the bios clear button. The Apex should have one on the back panel next to the ez flash button.
*edit* Beyond that you could check to make sure the two power cables going to the GPU are securely plugged in.
*edit* Beyond that you could check to make sure the two power cables going to the GPU are securely plugged in.
Joined
·
758 Posts
Thanks for the info..I was wondering about the power cable,it is split at the end into a "6-2 8 pin" connector and another "6 pin" connector all off the "one cable" and plugged into the card.Is this OK or should the power cables be 2 separate ones from the power supply..My PC is running excellent,just wondering why these codes were flashing on the mb.Does it always cycle through the code normally,never noticed it before,really never looked.
1 - 6 of 6 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
